Updated: 2/5/2012

Welcome to; "Frets On The Net"

 
only search Frets On The Net

 

Ordering & Shipping
A Few Words
F.A.Q's
Guitars/Used Parts
Hardware/Electronics
Battery Box Covers
USA Jackson Parts
Import Jackson
USA Charvel Parts
Import Charvel
Fender Parts
Yamaha Parts
Gibson Parts
ESP Parts
BC Rich Parts
Carvin Parts
Peavey Parts
Tremolo Bars
Pickup Rings
Pics & Testimonials
Links
Custom Engraving
Materials

 

Truss Rod Covers For ESP

It is very important that you let me know the type of cover you want and the

measurement from the top of the nut to the CENTER of the mounting hole as-

ESP has changed styles and measurements through the years.

Even if you just get it close, I should be able to figure out which measurement you need.

These are available in any of the colors you see on the other pages, please ask!

Engraved ESP logo'd Covers

$20

 

Solid  Aluminum and Solid  Brass

$16.00

 

Pearloid Finishes

$8.00

Laminated "Bell" Style

$12.00

Each

80's Laminated Style

NOTE*

Due to many customers who have been asking for these to fit later models,

I'm now making these available for those guitars as well.

You must check your measurement from the nut to the center of the mounting hole,

 and then let me know what that measurement is.

$10.00

Each

Truss rod cover and

tuner screws

.25 cents each

More Screws are HERE!

 

 ESP Logo'd Tremolo Saddle/Intonation Screws

Finally! These are the perfect replacements for your missing screws!

 

 .40 Cents each

Set of 6 for $2.00

 

ESP Logo'd Tremolo Saddle/String Locking Screws

Finally! These are the perfect replacements for your missing screws!

Sold in sets of 6 for $3.00

As used on these particular Tremolos:

 

ESP Tremolo Bars

Nice original style tremolo bars that fit the original Logo'd ESP tremolos.

I've had some questions on this trem as I'm hearing there are 2 different sockets for these.

These are made from solid polished or brushed stainless steel only.

Here's a closer pic of the type of socket that I make the bars for:

TB-Sync

$28.00

Example of the ESP tremolo:

ESP Synclair Adapters !!

Ok, so I've been helped out by a few customers (thanks guys!) with some info on the other threaded collar type tremolo bar and unfortunately, I will not be manufacturing these bars as it's just too involved for how many requests I get for it.

But,I have made an adapter that will fit the threaded socket of the base plate, that will allow you to fit a modern Floyd type tremolo bar into it. Now I've machined these to fit a specific bar that I get from my supplier so it will match correctly. Not all of these modern Floyd type bars run the same size so you're gambling if you just want the adapter alone.

There are 2 wrench flats that will allow you to snug this into the base plate but there is no need to over tighten these.

These are hardened/heat treated steel for optimum wear.

For both the adapter and tremolo bar, the price is $40.00

For the adapter alone, it's $25.00

 

A reference picture of the adapter.

(yes, I know it's not the ESP bridge in the picture but I had to send the original bridge back to the customer ;o))

Here are a couple of pics for reference of the tremolo that this adapter will fit:

 
Send mail to fretsonthenet@msn.com with questions or comments about this web site.
Copyright © 2004 Frets On The Net
Last modified: February 05, 2012