|
| |
Here you'll find some of the parts that
can be hard to find.
Always buy
extras so you have them on hand!! 
|
In my never-ending effort to make
things easier to find, I've updated and re-arranged this page for you to
find all items.
Click the link for the item you'd like to
see:
Body Parts
Neck Parts
Bridge Parts
Pickup
Parts
Electronics
|
Jackson JT6 Bridge String Lock Screws!
Available now are these Replacement
String Lock Screws for the Jackson JT6 Tremolos. These will use a smaller allen
wrench that I will make available soon. Remember, the whole reason these have to
be replaced is because everyone seems to want to over tighten this screw.
There is no need for that ;o)
As you can see in the pic below, while
they do look different, they're not bad at all and have a nice black finish to
match. I was going to start "kinking" the last thread near the wrench opening
but thought some of you might actually like the fact that the fine tuner can
turn right off. If you'd like this little feature, just give me a shout and let
me know and I can do that for you so you don't lose your fine tuner on stage ;o)
These are $4 each or a set of 6 for
$20.00
 
or
The set of 6
with Allen Wrench is
$21.00
|
JT6 Tremolo Posts AND Bushings
These are available again due to high
demand, first come first serve!
|
JT6 / Floyd Rose Posts
These are for the early Jacksons and Charvels that came stock with the
JT6 Tremolo. The pivot angles match the Original Floyd Rose so you'll
get more "range" when diving. These are heat treated and then a black
oxide is applied as a rust preventative. A light coat of oil is
recommended. |
$25.00 a Pair JCH-1 |
 |
|
Jackson / JT6 Floyd Tremolo Bushings now
available!
These are for the early Jackson's and Charvel's that came stock with the
JT6 Tremolo. They are the correct original threads and are slightly
oversized for a good press fit. NOTE* Please make sure your hole is not
too small as not to crack the body when pressing these in. I can not be
responsible for damage to the body. Please know what you're doing! |
$20.00 a Pair
JCH-2 |
 |
San Dimas Solid Brass String Trees
JCH-3
$15.00 each
Available in Natural and Black Anodized Aluminum!!
JCH-4
Risers for the String Trees
JCH-5
$5.00 (riser only)
Floyd Rose Adjustable Tremolo
Stops
These are located in the tremolo cavity route and allow a good
positive stop for the Inertia block (spring block) to rest on.
The thickness of this unit is 5/16ths" (.312) thick so
please make sure it will work for your application.
There are 2 plastic bumpers to eliminate the "clang" you get
when using metal stop blocks.
Screws are not included.
HWFL-1
$5.99
Example of Possible Installation:
 
Fine Tuners
|
Kahler 2300 &2500 (Tremolo), Flyer, & 3300 (Fixed Bridge)
Stainless Steel Fine
Tuners
These are made from solid stainless steel
and are not soft and weak like the brass screws.
Also available in sets of 6 for $20.00 |
$4.00 each screw
HWft-1 |
 |
|
Fender System I
Stainless Steel Fine
Tuners
These are made from solid stainless steel
and are not soft and weak.
Also available in sets of 6 for $25.00 |
$5.00
each screw
HWft-2
|
 |
|
Washburn
Fine Tuner Washers
This is a set of 6 Black Delrin
Washers for the Washburn / Shift 2001 Tremolo.
These are the thin black washers that
act as cushions for the fine tuners.
|
$12.00 for
the
set of 6 pcs. HWftw-3 |
 |
|
Washburn Wonderbar
Height Adjusting Screws
These are the Front (long) and Rear (short)
height adjusting set screws.
(Please enlarge picture to the right)
These are the same exact size and fit
that you need for those lost or rusted screws.
|
$1.80 for each
set of 6 pcs. Please let me know
which set you are ordering!
|
 |
Truss Rod Cover and Tuner
Round Head Screws
| Truss rod cover and tuner
round head screws in black |
.25 cents each
screw HWsc-1 |
 |
| Truss rod cover and tuner
round head screws in gold |
.25 cents each
screw HWsc-2 |
 |
| Truss rod cover and tuner
round head screws in chrome |
.25 cents each
screw HWsc-3 |
 |
Back Cover Plate Screws
|
Import
Back Plate Screws Fits Charvel, ESP,Kramer |
.40 cents each
screw HWsc-7 |
 |
|
Ibanez
Rear Cover Plate Screws
In Black
or Chrome |
.40 cents each screw
HWsc-8 |
|
|
Yamaha SE, RGX
Rear (Tremolo and Control Route) Cover Plate Screws |
.40 cents each screw
HWsc-8 |
|
Pickup Ring Mounting Screws
| Pickup Ring Mounting Screws
Note:
"Low Screws"
are for 3/16ths
ring height and
lower. "High
Screws"
are for 1/4"
ring height and
higher. |
Your Choice:
.25 cents each
Low
Gold: HWsc-4
Chrome: HWsc-6
Black: HWsc-5
High
Gold: HWsc-14
Chrome: HWsc-15
Black: HWsc-16 |
 |
EMG 707, EMG/81-7 and Series 35 Bass
Pickup Ring screws
| EMG 707, EMG/81-7
and Series 35 Bass
Pickup Ring screws These are
the screws that are used for the Pickup Rings that I make for these
rings. |
.25 cents each
screw HWsc-9 |
 |
Pickup Ring Height Screws
| Pickup Ring Height Screws in Black For Duncans or Dimarzios. (3-48 Thread)
These will not fit the raised covered Jackson Logo'd pickups!
|
$1.00
each screw
HWsc-10 |
 |
|
Pickup Ring Height Screws in Black For the
Jackson USA Open Coil and Covered
Pickups.
These
will fit the raised covered Jackson Logo'd pickups!
|
$1.00
each screw
HWsc-11 |
 |
Direct Mount Single Coil
Pickup Screws
|
Direct Mount Single Coil Pickup Screws in Black |
$1.00
each screw
HWsc-12
|
 |
|
Direct Mount Single Coil Pickup Screws in
Chrome |
$1.00
each screw
HWsc-13
|
 |
Strap Buttons, Screws & Felts
Strap Buttons:
| Relic'd Brass $22.00
per pair
HWsb-1
|
Brass $22.00 per
pair
HWsb-2
 |
| Aluminum
$22.00 per pair
HWsb-3
 |
Black Anodized
Aluminum
$24.00 per pair
HWsb-4
|
|
Strap
Button Screws in Stainless Steel |
$1.00
each screw HWsc-16 |
 |
|
Strap Button Felts in Black
(these are the nice dense type cushions) |
$1.00 per
pair |
 |
Lock Nut & String
Lock Screws & Wrenches
| Floyd Rose,
Ibanez, and JT6 Jackson String Lock Screws |
.40 cents
each screw HWsc-17 |
 |
| Floyd Rose,
Ibanez, and JT6 Jackson String Lock Screws
with Allen Wrench |
$2.00 a
set (3 screws & Wrench) HWscw-17 |
 |
| Kahler
"Behind the Nut"
String Lock Screws |
.40 cents
each screw HWsc-18 |
 |
| Kahler
"Behind the Nut"
String Lock Screws with Allen Wrench |
$2.00 a
set (3 screws & Wrench) HWscw-18 |
 |
| Fender System Series String Lock Replacement Screws! |
.40 cents each
screw HWsc-19 |
 |
|
Fender System Series String Lock Replacement Screw
with Allen Wrench
|
$2.00 a
set (3 screws & Wrench) HWscw-19 |
|
|
Fender System Series, Floyd Rose,
Ibanez, and JT6 Jackson
Allen Wrench Alone |
$1.50
each HWw-1 |
 |
| Kahler
"Behind the Nut"
Allen Wrench |
$1.50
each HWw-2 |
|
|
Washburn
Wonderbar 2001 String Lock Screws
Only available in Black
(example of the string lock)
 |
Black Only
.40 cents each
Set of 6 for $2.00
HWsc-20
|
 |
|
JT6 and Ibanez
Trem Socket Spring Screws This is
the screw that holds the spring and is a perfect fit for the Ibanez
edge and JT6 tremolo sockets |
.50 cents
each HWsc-21 |
 |
|
Floyd,
Schaller, and JT6 Tremolo Intonation Screws
A note on the
JT6 Intonation screws.
There are 4 versions of these which are the
length and head style.
The threaded portion of the screw had changed
through production of these because Jackson changed the baseplate
slot thickness for the recessed nut.
You have your choice of 2 lengths and 2 head
styles of these screws so please make sure you check what you need
or you can shoot me an email if you need help.
**Length of screw thread is measured under the
head**
Button Head in 8 mm (.315")
Button Head in 10 mm (.394")
Socket Head in 8 mm (.315")
Socket Head in 10 mm (.394") |
.40 Cents
each Set of 6 for $2.00 HWsc-22 |
|
|
Kahler
"Floyd Style"
Locking Nut Screws |
.40 cents
each screw HWsc-23 |
|
|
Kahler
"Floyd Style"
Locking Nut Screws with Allen Wrench |
$2.00 a
set
(3 screws & Wrench) HWscw-23 |
 |
|
|
Sold in sets of
6 for $3.00
*HWscw-26 |
 |
|
Rockin'Magic II
Intonation Buttonhead Screws
As found on most SE and Early RGX Models
|
.40 cents
each |
 |
|
Rockin'Magic II
Saddle Lockdown Flathead Screws
As found on most SE and Early RGX Models
|
.40 cents
each |
|
|
RM-Pro Tremolo
Intonation or Saddle/String Lockdown Screws
|
.40 cents
each |
 |
|
RM-Pro Tremolo
Locknut Screws
As found on most SE and RGX Models
|
.40 cents
each |
 |
|
Rockin'Magic
String Lock Screws
As found on most SE and RGX Models
|
.40 cents
each |
 |
Jackson/Charvel
JT6
& Fender System Series String Locking Plates
|
JT6 String Locking Plates
|
$5.00 each
or a set of 3 for
$13.00 HWpl-1 |
 |
| Fender System Series String Lock
Replacement Plates! |
$5.00 each
or a set of 3 for
$13.00
HWpl-3
|
 |
Kahler Palm Bar Set Screws
| Kahler Palm Bar Set Screws: |
.25 cents each
screw HWsc-24 |
 |
Top Of Body
String Ferrules
|
Top Of Body
String Ferrules!
I finally found a source for these and
thought I'd offer them here because I'd had so many requests for them. Sets of 6
in Chrome, Black, or Gold.
|
$10.00
each
set
Gold: HWsf-1
or Black:
HWsf-3
----------------------------------
Chrome: Sold out
and no longer available
|
 |
GOTOH Battery Boxes
|
GOTOH
Battery Boxes Can be
installed in the body after it's been routed by you or these can be
installed in your rear cover plates (if there's room!), which I can
do here for you. Please click
here for details.
A few important dimensions you
might like:
L= 2-3/4" X W= 1-9/64ths"
Depth
is as shown below where it's
1-5/16ths from under the mounting lip:
Example of the box mounted in a Charvel Model 2
|
$12.00
Each HWbc-1
|
 |
Tremolo Bar & Socket Bushings
| Washburn Wonderbar Tremolo Socket Bushings: |
$12.00
HWbu-1 |
 |
| System I Trem arm bushings!
These are the plastic bushing that
fits between the round, chrome friction
nut and the arm socket in the baseplate. The bushing is the black ring in
the photo to the right:
|
$12.00 each
HWbu- 2 |
 |
| See note below! JT6
(Jackson/Charvel) and Ibanez Edge Tremolo Bar Bushings: |
$2.00 each
bushing HWbu- 3 |
 |
Please note, these bushings will not fit
the original JT6 tremolo bars without modification so you must tell me what they
are for when ordering so I can modify them for you for proper fit!! They will,
however, fit the JT6 Bars and the Ibanez Edge bars that I make and the original
Edge bar as well with no modification.
Example of an Original Ibanez Edge Tremolo Bar:
These were black from the factory.
Example of an Original JT6 Tremolo Bar:
These were chrome from the factory,
despite what some may tell you.
Brass & Aluminum Jack Plates
!
(Temporarily unavailable with
clear coating on
polished brass and aluminum)
|
These are great solid brass replacements for the brass
jack plates as found on some of the older Charvels and Schecters.
They also fit
Gibson Les Pauls perfectly as well.
These specific jackplates will come flat
unless noted by you. |
 |
Relic'd finish : $14.00
HWjp-1
Polished Finish: $14.00
HWjp-2 |
|
Older Oversized Oval "Strathead" Charvel Jackplates
made from the same very thin Aluminum
and then Black Anodized. |
 |
$18.00 Each
HWjp-3 |
|
Newer "Football" Jackplates
Will fit
Ibanez, Charvel, Jackson guitars Aluminum Black Anodized,
polished or brushed brass, and
polished or brushed
aluminum. Aluminum not shown. |
|
$18.00 Each
Brass/Brushed HWjp-4
Brass/Polished HWjp-8
Brass/Relic'd HWjp-9
Polished Aluminum: HWjp-5
Black:
HWjp-6 |
|
BC Rich Import Jackplates
Black matte plastic
|
 |
$8.00
each
HWjp-7 |
Neck Plates
(Temporarily unavailable with
clear coating on
polished brass and aluminum)
These are made from solid 1/8th inch
thick, Brass
and can be polished
or have an uncoated brushed or "Relic'd" finish.
These are the standard Fender, Charvel
Jackson Bolt pattern.
|
Solid Uncoated Brass
Relic'd finish
$14.00
HWnp-1
|
Solid Uncoated Brass
Brushed Finish:
$14.00
HWnp-2
|
|
Solid Brass Polished Finish:
$15.00 HWnp-3
|
Black Anodized Aluminum
Finish
$15.00
HWnp-4
 |
|
Solid Aluminum Polished Finish:
$15.00 HWnp-5
|
Solid Uncoated Aluminum
Brushed Finish:
$13.00
HWnp-6
|
|
New Black Plastic Backer Pads
for the neck plates are here!!
These will fit all my neckplates and
other
standard Strat,
Jackson and Charvel
both import and USA models.
$2.25 each
HWnp-7
|
Solid Uncoated Aluminum
Grynd Finish:
$13.00
HWnp-8
 |
Neck
Plate Screws I've had some
requests to add screws for my Neck Plates-
(For the Jackson/Charvel
customers, through the years, they had changed the sizes of the neck plate
screws -
- so please check the size to make sure
they're just what you need!)
| Neck Plate
Screws (4 Pieces) Phillips Head, Stainless Steel,
#8 x 1-3/4" |
$1.00 Each
or
$3.00 for a set of 4
HWsc-25 |
 |
| Neck Plate
Screws (4 Pieces) Phillips Head, Black, #8 x
1-3/4" |
$1.00 Each
or
$3.00 for a set of 4
HWsc-26
|
 |
|
Original "Paddle" style pickup and boost switches
These are used as the pickup switches on Model 6's
and 4's and were also used on the boost systems
and other electronics used by Jackson/Charvel
guitars. |
$8.00
each HWsw-1 |
 |
|
Solid Brass Grounding Plates
So far, these are available for all Model Series
Charvels, Usa Ontario Cavities (3 & 4 hole), Original Dimas Cavity and
King V cavities. (I don't
have the smaller triangle cavity used in the 90's and some soloists as
of yet.) |
$4.00
each JCH-6 |
 |
|
