Fender Rings

These are the same thickness, shape and size as the Fender Tele Plus style pickup rings. The will mount right up to the original holes and specs.

I can also make this size ring to fit a specific humbucker that you'd like instead of the original Dually Lace pickup as well as shown in the next column to the right right (top picture).

Fender Wide Range Rings

These can also be made for you so please inquire.

Aircraft Uncleared Aluminum

Available in Satin, Polished or Brushed!

Solid Uncleared Brass

Available in Satin, Polished or Brushed!

Beautiful Matte Black

or Glossy Plastic

Available in Satin or Brushed!

Black Anodized Aluminum

Available in Satin, or Brushed!

$22.00 Each Ring

$6.00

each screw

HWft-2B

 Fender System I Stainless Steel Fine Tuners  

These are made from solid stainless steel and are not soft and weak.

Also available in sets of 6 for $28.00

each screw

HWft-2

with Allen Wrench

(3 screws & Wrench)

$2.00 a set

(3 screws & Wrench)

HWscw-23

Natural

 Aluminum

Black

Anodized

Aluminum

These are the plastic bushing that fits between the round, chrome friction nut and the arm socket in the baseplate.

Angled side faces up into the Friction Collar.

The bushing is the black ring in the photo to the right:

Solid Uncoated Brass

Relic'd finish

$14.00

HWnp-1

Solid Uncoated Brass

Brushed Finish:

$14.00

HWnp-2

Solid Brass

Polished  Finish:

$15.00

HWnp-3

Black Anodized Aluminum

Finish

$15.00

HWnp-4

Solid Aluminum

Polished  Finish:

$15.00

HWnp-5

Solid Uncoated Aluminum

Brushed Finish:

$14.00

HWnp-6

New Black Plastic Backer Pads

for the neck plates are here!!

These will fit all my neckplates and other

standard Strat,

Jackson and Charvel both import and USA models.

$3.00 each

HWnp-7

Solid Uncoated Aluminum

Grynd Finish:

$14.00

HWnp-8

Kahler Tremolo Bars

Kahler Steeler, Traditional Fulcrum, Killer, or Spyder (2700 Series) Bars

TB-KFul

$28.00

Pic of the Kahler Traditional Fulcrum: 2500 Series:

Kahler Steeler, Killer or Spyder:

TB-Kspy

$28.00

Pic of the Kahler Steeler:

Pic of the Kahler Spyder:

Pic of the Kahler Killer:

Kahler Pro, Standard, (2200/2300 Series) or Flyer Bars

These are made to be exactly as the originals were except with a much nicer finish. These are available in stainless steel or the brass and these have the same threaded configuration and the same bends for those that wanted the original style.

TB-Kpro

$28.00 each

Pic of the Solid Hardened Brass on Kahler Pro

Pictured in Polished Stainless Steel and Hardened Brass (matches gold!). It's better than chrome or gold plating because it will never chip or peel or rust! 

Kahler Bass Bars (3400 Series)

TB-Kbass

$30.00

Specifically made to the longer length for the Bass Tremolo

Fender System I Tremolo Bars

TB-SYS1

$27.00

These are made from solid polished or brushed stainless steel only and will not rust peel or chip.

Please be aware of other companies selling bars for the System one,

they are not the correct size and require permanent modification to your tremolo!

Mine are exactly like the original bar and just pop right in.

System 1 Fine Tuner and Tremolo Bar Repairs

Fine Tuner Repair:

If you've found that you have stripped out the threads for your fine tuners, I can easily rethread these with a slightly larger size thread

and provide a fine tuner that will function like new again. I can either do just one, or all 6 for you.

The total for this service for all 6 fine tuners would be $45.00 plus the shipping back to you.

I'll be happy to help in any way I can!

Tremolo Bar Repair / Conversions:

If you have missing or broken parts on your System 1 Tremolo, I can help get you back into action with a conversion service that I provide.

I can help you (or do it for you) give your trem new life with a modern Floyd Type Tremolo Bar!

Read below if you're mechanically inclined and you're not afraid to use power tools.

If you can use a drill and you're comfortable drilling out the tremolo socket hole in your bridge, you won't even have to send the bridge to me.

All you have to do is be able to hold your bridge in a suitable vise or clamp and drill out the existing hole to a slightly larger size.

Email  me for details!

$27.00 each.

If you need the Allen wrench (3mm) for the installation, I have those as well.

$1.00

Read this if you'd rather have me do all the work for you!

If you're not up to the task of doing it yourself, I can do it for you. All that is required is that you send the bridge to me and I'll take care of the rest for you.

Cost of the service which includes the bar is $42.00 plus the shipping back to you.

Email with any questions you may have!

System I Trem arm bushings!

$12.00 each

These are the plastic bushing that fits between the round, chrome friction nut and the arm socket in the base plate. The bushing is the black ring in the photo below:

Fender System Series String Lock Replacement Screws!

.40 cents each

(Locknut, not available)

Fender System II (2) and III (3) Tremolo Bar Conversions

If you're tired of looking for a bar for that System 2 or 3, I can help by supplying a modern type Floyd bar that will fit right in the existing hole in the tremolo base plate.

There are no modifications that you must make, just unscrew the nuts that are holding in the existing socket and replace it with this one.

These should actually work for the Elite and Free Flyte as well but have not tested those yet.

$27.00 each.

If you need the Allen wrench (3mm) for the installation, I have those as well.

  Mid-Point Style tips in Polished Brass And Aluminum

$15.00 each

Classic Style tips in Polished Brass And Aluminum

$15.00 each